6000 Aspersores

Microaspersores

Los microaspersores se pueden clasifican según los siguientes criterios:

clasificacion-microemisores

UU6001
½” full/part circle plastic sprinkler

UU6001 Specification:

  • Nozzle diameter: 2.8 mm
  • Working pressure: 0.5-2.5 bar
  • Radius: 3 – 10 m
  • Flow rate: 7.2 – 19.4 l/min

Features:

  • ½” full/part circle plastic sprinkler
  • ½” male NPT
  • Stainless steel spring
  • PTFE washer, working smoothly.
  • Smooth rotation at lower pressures.
UU6001-1
UU6001 with plastic spike		 UU6001-2
UU6001 with zinc-alloy  spike
UU6001-3
UU6001 with H-type base		 UU6001-5 picture
UU6001-5
½” full/part circle sprinkler

UU6001-5 Specification:

  • Size: ½”
  • Nozzle diameter: 3.2 mm
  • Working pressure: 0.5-2.5 kPa
UU6002-1½” male plastic sprinkler with single nozzle UU6002-2½” male plastic sprinkler with double nozzle

  • Bearing: ½” male NPT, plastic
  • Trajectory angle: 22º
  • Operating range: 0.5 -3.0 bar
  • Flow rate: 0.79 – 2.68 GPM
  • Radius: 23 – 38 ft
UU6003C
Under tree sprinkler

  • ½” full circle plastic impact sprinkler
  • Nozzle diameter: 3.2 x 2.5
  • Working pressure: 1.5 – 3.5 bar
  • Coverage: 18 – 26 m
  • Flow: 14 – 20.2 l/min
  • With or without cap
 UU6003C-cap
Under tree sprinkler

  • ½” full circle plastic impact sprinkler
  • Nozzle diameter: 3.2 x 2.5
  • Working pressure: 1.5 – 3.5 bar
  • Coverage: 18 – 26 m
  • Flow: 14 – 20.2 l/min
  • With or without cap
UU6003D
Under tree low angle sprinkler

  • ½” full circle plastic impact sprinkler
  • Nozzle diameter: 3.2 x 2.5
  • Working pressure: 1.5 – 3.5 bar
  • Coverage: 18 – 26 m
  • Flow: 14 – 20.2 l/min
  • With or without cap
 UU6003D-cap
Under tree low angle sprinkler

  • ½” full circle plastic impact sprinkler
  • Nozzle diameter: 3.2 x 2.5
  • Working pressure: 1.5 – 3.5 bar
  • Coverage: 18 – 26 m
  • Flow: 14 – 20.2 l/min
  • With or without cap
UU6003E
Under tree low angle sprinkler

  • 3/4” non-thread connector full circle plastic impact sprinkler
  • High-impact heavy-duty plastic material
  • Stainless steel shaft and spring
  • Sealed bearing ensures reliable operation and long life in sandy and dusty applications
  • Nozzle diameter: 2.5, 2.8, 3.0, 3.2, 3.5
  • Working pressure: 1.5 – 3.5 bar
  • Coverage: 15.5 – 22.5 m
  • Flow: 5.8 – 15.5 l/min
  • With or without cap
  • Applications: orchards, banana plants, plantations and vineyards.
 UU6003E-cap
Under tree low angle sprinkler

  • 3/4” non-thread connector full circle plastic impact sprinkler
  • High-impact heavy-duty plastic material
  • Stainless steel shaft and spring
  • Sealed bearing ensures reliable operation and long life in sandy and dusty applications
  • Nozzle diameter: 2.5, 2.8, 3.0, 3.2, 3.5
  • Working pressure: 1.5 – 3.5 bar
  • Coverage: 15.5 – 22.5 m
  • Flow: 5.8 – 15.5 l/min
  • With or without cap
  • Applications: orchards, banana plants, plantations and vineyards.
UU6004
¾” full circle plastic impact sprinkler

  • Nozzle diameter: 4.0 x 2.5, 4.5 x 2.5, 5.0 x 2.5, 5.5 x 2.5
  • Working pressure: 1.0 – 4.0 bar
  • Coverage: 16 – 28 m
  • Flow: 13 – 27 l/min
 UU6004ADJ
¾” full/partial circle sprinkler. Adjustable angle.

  • Nozzle diameter: 4.0 mm
  • Working pressure: 1.0 – 4.0 bar
  • Coverage: 16 – 28 m
  • Flow: 8.9 – 20 l/min
UU6005
¾” full circle impact sprinkler with brass nozzle

  • 3/4” female & male NPT threaded
  • Heavy duty plastic POM
  • Stainless steel spring & pin
  • Brass nozzle
  • PTFE washer, working smoothly. It can start to work under a very low water pressure 0.8 bar.
 UU6005M
¾” full circle impact sprinkler with brass nozzle 

  • 3/4” female & male NPT threaded
  • Heavy duty plastic POM
  • Stainless steel spring & pin
  • Brass nozzle
  • PTFE washer, working smoothly. It can start to work under a very low water pressure 0.8 bar.
UU6007
Sprinkler

  • With brass nozzle, metal heavier
  • Trajectory angle: 23º
  • Nozzle diameter: 5.0 x 2.5
  • Working pressure: 0.5 – 4.0 bar
  • Coverage: 3 – 16.5 m
  • Flow: 0.26 – 0.41 l/s

Features:

  • ¾” female or male NPT threaded
  • Heavy duty plastic POM
  • Stainless steel spring & pin
  • Brass nozzle
  • Metal-heavy assembled
  • PTFE washer, working smoothly
  • It can start-up under a very low water pressure
 UU6007-1
Sprinkler

  • With brass nozzle, metal heavier
  • Trajectory angle: 23º
  • Nozzle diameter: 5.0 x 2.5
  • Working pressure: 0.5 – 4.0 bar
  • Coverage: 3 – 16.5 m
  • Flow: 0.26 – 0.41 l/s

Features:

  • ¾” female or male NPT threaded
  • Heavy duty plastic POM
  • Stainless steel spring & pin
  • Brass nozzle
  • Metal-heavy assembled
  • PTFE washer, working smoothly
  • It can start-up under a very low water pressure
UU6007-2
Sprinkler 3/4” plastic nozzle

  • With brass nozzle (metal heavier)
  • Nozzle diameter: 5.0 x 2.5
  • Working pressure: 0.5 – 4.0 bar
  • Coverage: 3 – 16.5 m
  • Flow: 0.26 – 0.41 l/s

Features:

  • ¾” female & male NPT threaded
  • Heavy duty plastic (POM)
  • Stainless steel spring & pin
  • Plastic nozzle
  • PTFE washer, working smoothly
  • It can start-up under a very low water pressure
 UU6007-3
Sprinkler 3/4” plastic nozzle

  • With brass nozzle (metal heavier)
  • Nozzle diameter: 5.0 x 2.5
  • Working pressure: 0.5 – 4.0 bar
  • Coverage: 3 – 16.5 m
  • Flow: 0.26 – 0.41 l/s

Features:

  • ¾” female & male NPT threaded
  • Heavy duty plastic (POM)
  • Stainless steel spring & pin
  • Plastic nozzle
  • PTFE washer, working smoothly
  • It can start-up under a very low water pressure

 

UU6020
Sprinkler

  • Trajectory angle: 23º
  • Nozzle diameter: 5.0 x 2.5
  • Working pressure: 2.0 – 4.0 bar
  • Coverage: 14 – 17.8 m
  • Flow: 7.0 – 33-5 l/min

Features:

  • ¾” female & male NPT threaded
  • Heavy duty plastic body, arm and bearing sleeve
  • Stainless steel spring & pin
  • Plastic nozzle
  • Chemical resistant PTFE washers
  • Dual nozzle ports, with metal heavy
 UU6020 M
Sprinkler

  • Trajectory angle: 23º
  • Nozzle diameter: 5.0 x 2.5
  • Working pressure: 2.0 – 4.0 bar
  • Coverage: 14 – 17.8 m
  • Flow: 7.0 – 33-5 l/min

Features:

  • ¾” female & male NPT threaded
  • Heavy duty plastic body, arm and bearing sleeve
  • Stainless steel spring & pin
  • Plastic nozzle
  • Chemical resistant PTFE washers
  • Dual nozzle ports, with metal heavy
UU6020B-M
Sprinkler

  • 3/4” male type. With metal heavier.
  • Nozzle diameter: 5.0 x 3.0 mm
  • Working pressure: 1 – 4 bar
  • Shot radius: 9.9 – 19.8 m
  • Flow: 21.5 – 43 l/min
 UU6034
UU6011Sprinkler (red cap)

  • 3/4” NPT thread
  • Trajectory angle: 30º
  • Nozzle diameter: 4.0 x 4.5
  • Working pressure: 0.5 – 4.0 bar
  • Coverage: 15 m
  • Flow: 7.2 – 30.4 l/min
  • Stainless steel spring
  • Metal-heavy assembled
  • Heavy duty plastic (ABS)
  • Chemical resistant PTFE washers
  • Optional brass nozzle
 UU6012Sprinkler (red cap)

  • 3/4” NPT thread
  • Trajectory angle: 30º
  • Nozzle diameter: 4.0 x 4.5
  • Working pressure: 0.5 – 4.0 bar
  • Coverage: 15 m
  • Flow: 7.2 – 30.4 l/min
  • Stainless steel spring
  • Metal-heavy assembled
  • Heavy duty plastic (ABS)
  • Chemical resistant PTFE washers
  • Optional brass nozzle
UU6026

  • 1” RC260 Spanish model
  • Nozzle diameter: 4.8 x 3.2
  • Working pressure: 1.0 – 4.0 bar
  • Shoot distance: 13.5 – 16.5 m
  • Flow: 21 – 43 l/min
 UU6027

  • 1” female
  • Nozzle diameter: 2.7 x 7.6
  • Working pressure: 1.0 – 4.0 bar
  • Shoot distance: 14.5 – 48.8 m
  • Flow: 41.1 – 82 l/min
UU6028

Under tree, low angle, banana sprinkler

  • ½” male
  • Full cycle
  • Low trajectory: 14º
  • Nozzle diameter: 2.5 mm
  • Shoot distance: 19.2 – 21.2 m
  • Flow: 5.9 – 8.6 l/min

Pop-up sprinklers

UU6008
Pop-up sprinkler

  • ½” pop-up sprinkler
  • Trajectory angle: 23º
  • Nozzle diameter: 3.97 mm
  • Working pressure: 2 – 4 bar
  • Coverage: 12 – 26 m
  • Flow: 5.6 – 24 l/min
 UU6008-1Pop-up sprinkler

  • ½” pop-up sprinkler
  • Trajectory angle: 23º
  • Nozzle diameter: 3.97 mm
  • Working pressure: 2 – 4 bar
  • Coverage: 12 – 26 m
  • Flow: 5.6 – 24 l/min
UU6008-2
Pop-up sprinkler

  • ½” pop-up sprinkler
  • Trajectory angle: 23º
  • Nozzle diameter: 3.97 mm
  • Working pressure: 2 – 4 bar
  • Coverage: 12 – 26 m
  • Flow: 5.6 – 24 l/min
 UU6008-3
Pop-up sprinkler

  • ½” pop-up sprinkler
  • Trajectory angle: 23º
  • Nozzle diameter: 3.97 mm
  • Working pressure: 2 – 4 bar
  • Coverage: 12 – 26 m
  • Flow: 5.6 – 24 l/min
UU6009 FUnder tree impact sprinkler with quick coupling valve

  • ¾” female connector
  • Material: ABS
  • Nozzle: square 2.5 x 2.5 mm
  • Working pressure: 0.5 – 4.0 bar
  • Can start to work under low water pressure 0.5 bar.
  • Coverage: 10 m
  • 360º rotation
  • Flow: 7.2 – 30.4 l/h
 UU6009 MUnder tree impact sprinkler with quick coupling valve

  • ¾” male connector
  • Material: ABS
  • Nozzle: square 2.5 x 2.5 mm
  • Working pressure: 0.5 – 4.0 bar
  • Can start to work under low water pressure 0.5 bar.
  • Coverage: 10 m
  • 360º rotation
  • Flow: 7.2 – 30.4 l/h
UU6009-1 M
Under tree impact sprinkler with quick coupling valve

  • 1” male connector
  • Material: ABS
  • Nozzle: square 2.5 x 2.5 mm
  • Working pressure: 0.5 – 4.0 bar
  • Can start to work under low water pressure 0.5 bar.
  • Coverage: 10 m
  • 360º rotation
  • Flow: 7.2 – 30.4 l/h
 UU6010 FUnder tree impact sprinkler with quick coupling valve

  • ½” male connector
  • Material: ABS
  • Nozzle: square 2.5 x 2.5 mm
  • Working pressure: 0.5 – 4.0 bar
  • Can start to work under low water pressure 0.5 bar.
  • Coverage: 10 m
  • 360º rotation
  • Flow: 7.2 – 30.4 l/h