Microaspersores
Los microaspersores se pueden clasifican según los siguientes criterios:
![clasificacion-microemisores](http://uuater.es/wp-content/uploads/clasificacion-microemisores.png)
![UU6001-5](http://uuater.es/wp-content/uploads/UU6001-5-300x251.png)
½” full/part circle sprinkler |
UU6001-5 Specification:
- Size: ½”
- Nozzle diameter: 3.2 mm
- Working pressure: 0.5-2.5 kPa
|
½” male plastic sprinkler with single nozzle |
½” male plastic sprinkler with double nozzle
- Bearing: ½” male NPT, plastic
- Trajectory angle: 22º
- Operating range: 0.5 -3.0 bar
- Flow rate: 0.79 – 2.68 GPM
- Radius: 23 – 38 ft
|
![UU6003C](http://uuater.es/wp-content/uploads/UU6003-300x218.png)
Under tree sprinkler
- ½” full circle plastic impact sprinkler
- Nozzle diameter: 3.2 x 2.5
- Working pressure: 1.5 – 3.5 bar
- Coverage: 18 – 26 m
- Flow: 14 – 20.2 l/min
- With or without cap
|
![UU6003C-cap](http://uuater.es/wp-content/uploads/UU6003C-cap-300x221.png)
Under tree sprinkler
- ½” full circle plastic impact sprinkler
- Nozzle diameter: 3.2 x 2.5
- Working pressure: 1.5 – 3.5 bar
- Coverage: 18 – 26 m
- Flow: 14 – 20.2 l/min
- With or without cap
|
![UU6003D](http://uuater.es/wp-content/uploads/UU6003D-300x233.png)
Under tree low angle sprinkler
- ½” full circle plastic impact sprinkler
- Nozzle diameter: 3.2 x 2.5
- Working pressure: 1.5 – 3.5 bar
- Coverage: 18 – 26 m
- Flow: 14 – 20.2 l/min
- With or without cap
|
![UU6003D-cap](http://uuater.es/wp-content/uploads/UU6003D-cap-300x228.png)
Under tree low angle sprinkler
- ½” full circle plastic impact sprinkler
- Nozzle diameter: 3.2 x 2.5
- Working pressure: 1.5 – 3.5 bar
- Coverage: 18 – 26 m
- Flow: 14 – 20.2 l/min
- With or without cap
|
![UU6003E](http://uuater.es/wp-content/uploads/UU6003E-300x247.png)
Under tree low angle sprinkler
- 3/4” non-thread connector full circle plastic impact sprinkler
- High-impact heavy-duty plastic material
- Stainless steel shaft and spring
- Sealed bearing ensures reliable operation and long life in sandy and dusty applications
- Nozzle diameter: 2.5, 2.8, 3.0, 3.2, 3.5
- Working pressure: 1.5 – 3.5 bar
- Coverage: 15.5 – 22.5 m
- Flow: 5.8 – 15.5 l/min
- With or without cap
- Applications: orchards, banana plants, plantations and vineyards.
|
![UU6003E-cap](http://uuater.es/wp-content/uploads/UU6003E-cap-300x249.png)
Under tree low angle sprinkler
- 3/4” non-thread connector full circle plastic impact sprinkler
- High-impact heavy-duty plastic material
- Stainless steel shaft and spring
- Sealed bearing ensures reliable operation and long life in sandy and dusty applications
- Nozzle diameter: 2.5, 2.8, 3.0, 3.2, 3.5
- Working pressure: 1.5 – 3.5 bar
- Coverage: 15.5 – 22.5 m
- Flow: 5.8 – 15.5 l/min
- With or without cap
- Applications: orchards, banana plants, plantations and vineyards.
|
![UU6004](http://uuater.es/wp-content/uploads/UU6004-300x220.png)
¾” full circle plastic impact sprinkler
- Nozzle diameter: 4.0 x 2.5, 4.5 x 2.5, 5.0 x 2.5, 5.5 x 2.5
- Working pressure: 1.0 – 4.0 bar
- Coverage: 16 – 28 m
- Flow: 13 – 27 l/min
|
![UU6004ADJ](http://uuater.es/wp-content/uploads/UU6004ADJ-300x219.png)
¾” full/partial circle sprinkler. Adjustable angle.
- Nozzle diameter: 4.0 mm
- Working pressure: 1.0 – 4.0 bar
- Coverage: 16 – 28 m
- Flow: 8.9 – 20 l/min
|
![UU6005](http://uuater.es/wp-content/uploads/UU6005-300x232.png)
¾” full circle impact sprinkler with brass nozzle
- 3/4” female & male NPT threaded
- Heavy duty plastic POM
- Stainless steel spring & pin
- Brass nozzle
- PTFE washer, working smoothly. It can start to work under a very low water pressure 0.8 bar.
|
![UU6005M](http://uuater.es/wp-content/uploads/UU6005M-300x224.png)
¾” full circle impact sprinkler with brass nozzle
- 3/4” female & male NPT threaded
- Heavy duty plastic POM
- Stainless steel spring & pin
- Brass nozzle
- PTFE washer, working smoothly. It can start to work under a very low water pressure 0.8 bar.
|
![UU6007](http://uuater.es/wp-content/uploads/UU6007-300x209.png)
Sprinkler
- With brass nozzle, metal heavier
- Trajectory angle: 23º
- Nozzle diameter: 5.0 x 2.5
- Working pressure: 0.5 – 4.0 bar
- Coverage: 3 – 16.5 m
- Flow: 0.26 – 0.41 l/s
Features:
- ¾” female or male NPT threaded
- Heavy duty plastic POM
- Stainless steel spring & pin
- Brass nozzle
- Metal-heavy assembled
- PTFE washer, working smoothly
- It can start-up under a very low water pressure
|
![UU6007-1](http://uuater.es/wp-content/uploads/UU6007-1-300x175.png)
Sprinkler
- With brass nozzle, metal heavier
- Trajectory angle: 23º
- Nozzle diameter: 5.0 x 2.5
- Working pressure: 0.5 – 4.0 bar
- Coverage: 3 – 16.5 m
- Flow: 0.26 – 0.41 l/s
Features:
- ¾” female or male NPT threaded
- Heavy duty plastic POM
- Stainless steel spring & pin
- Brass nozzle
- Metal-heavy assembled
- PTFE washer, working smoothly
- It can start-up under a very low water pressure
|
![UU6007-2](http://uuater.es/wp-content/uploads/UU6007-2-300x216.png)
Sprinkler 3/4” plastic nozzle
- With brass nozzle (metal heavier)
- Nozzle diameter: 5.0 x 2.5
- Working pressure: 0.5 – 4.0 bar
- Coverage: 3 – 16.5 m
- Flow: 0.26 – 0.41 l/s
Features:
- ¾” female & male NPT threaded
- Heavy duty plastic (POM)
- Stainless steel spring & pin
- Plastic nozzle
- PTFE washer, working smoothly
- It can start-up under a very low water pressure
|
![UU6007-3](http://uuater.es/wp-content/uploads/UU6007-3-300x224.png)
Sprinkler 3/4” plastic nozzle
- With brass nozzle (metal heavier)
- Nozzle diameter: 5.0 x 2.5
- Working pressure: 0.5 – 4.0 bar
- Coverage: 3 – 16.5 m
- Flow: 0.26 – 0.41 l/s
Features:
- ¾” female & male NPT threaded
- Heavy duty plastic (POM)
- Stainless steel spring & pin
- Plastic nozzle
- PTFE washer, working smoothly
- It can start-up under a very low water pressure
|
Pop-up sprinklers
![UU6008](http://uuater.es/wp-content/uploads/UU6008-300x244.png)
Pop-up sprinkler
- ½” pop-up sprinkler
- Trajectory angle: 23º
- Nozzle diameter: 3.97 mm
- Working pressure: 2 – 4 bar
- Coverage: 12 – 26 m
- Flow: 5.6 – 24 l/min
|
Pop-up sprinkler
- ½” pop-up sprinkler
- Trajectory angle: 23º
- Nozzle diameter: 3.97 mm
- Working pressure: 2 – 4 bar
- Coverage: 12 – 26 m
- Flow: 5.6 – 24 l/min
|
![UU6008-2](http://uuater.es/wp-content/uploads/UU6008-2-205x300.png)
Pop-up sprinkler
- ½” pop-up sprinkler
- Trajectory angle: 23º
- Nozzle diameter: 3.97 mm
- Working pressure: 2 – 4 bar
- Coverage: 12 – 26 m
- Flow: 5.6 – 24 l/min
|
![UU6008-3](http://uuater.es/wp-content/uploads/UU6008-3-256x300.png)
Pop-up sprinkler
- ½” pop-up sprinkler
- Trajectory angle: 23º
- Nozzle diameter: 3.97 mm
- Working pressure: 2 – 4 bar
- Coverage: 12 – 26 m
- Flow: 5.6 – 24 l/min
|
Under tree impact sprinkler with quick coupling valve
- ¾” female connector
- Material: ABS
- Nozzle: square 2.5 x 2.5 mm
- Working pressure: 0.5 – 4.0 bar
- Can start to work under low water pressure 0.5 bar.
- Coverage: 10 m
- 360º rotation
- Flow: 7.2 – 30.4 l/h
|
Under tree impact sprinkler with quick coupling valve
- ¾” male connector
- Material: ABS
- Nozzle: square 2.5 x 2.5 mm
- Working pressure: 0.5 – 4.0 bar
- Can start to work under low water pressure 0.5 bar.
- Coverage: 10 m
- 360º rotation
- Flow: 7.2 – 30.4 l/h
|
![UU6009-1 M](http://uuater.es/wp-content/uploads/UU6009-1-M-300x296.png)
Under tree impact sprinkler with quick coupling valve
- 1” male connector
- Material: ABS
- Nozzle: square 2.5 x 2.5 mm
- Working pressure: 0.5 – 4.0 bar
- Can start to work under low water pressure 0.5 bar.
- Coverage: 10 m
- 360º rotation
- Flow: 7.2 – 30.4 l/h
|
Under tree impact sprinkler with quick coupling valve
- ½” male connector
- Material: ABS
- Nozzle: square 2.5 x 2.5 mm
- Working pressure: 0.5 – 4.0 bar
- Can start to work under low water pressure 0.5 bar.
- Coverage: 10 m
- 360º rotation
- Flow: 7.2 – 30.4 l/h
|